The Sweater Of Determination, Or The Deauville (HSM #11)

I’m really excited to have finished this sweater and even more excited that I like the finished product! It’s been a bumpy road to completion… but more on that later in this post.

First, I’m excited that this sweater qualifies for the Historical Sew Monthly challenge #11: Above The Belt!

No hitting low! Let’s keep things on the up and up as the year closes, and make something worn above the belt.

Before I go into the story of this sweater, here are just the facts:

Fabric:  1 ¾ skeins of Red Heart with Love acrylic yarn in Boysenberry, ¾ skein of Red Heart with Love acrylic yarn in Eggshell, & ¼ skein of Lion Brand Vanna’s Choice acrylic yarn in Dusty Purple.

Pattern: An ad for Fleischer Yarn published in The Ladies Home Journal.

Year: June 1920.

Notions: None!

How historically accurate is it?: 90%. The weight of the yarn is a bit heavy, though the fiber content and color are plausible. My crazy alterations make sense but of course the goal would have been to avoid their necessity.

Hours to complete: So, so many. At least 100, I would think.

First worn: November 23, 2019.

Total cost: Approximately $39.

Inspiration

The story of this sweater starts with inspiration I found on Pinterest for 1920s sweaters. I think I came across these while making my last sweater in 2013, the 1917 Sweater of Angorina. Fast forward a few years to the summer of 2016 when I got all excited and ordered tons of yarn. Enough for three sweaters…

(Let’s get side tracked for a moment to tally my successes at using all that yarn. The 1st of those three sweaters is made but has never been photographed (it’s on the list of things to do!). The 2nd sweater is the Deauville this post is about. The 3rd sweater hasn’t been started… the yarn is still sitting in my stash. But after making two quite thick sweaters out of this weight of yarn, I’m pretty sure that the yarn I have for the 3rd sweater will not make what I want. Here’s the inspiration for the 3rd sweater–despite knitting rather often I’m not confident in my ability to pick the right weight of yarn and size knitting needles for a project like a sweater. I think that a sport weight yarn might be better for that 3rd inspiration, but I’m not sure. I’ll have to do more research!)

But back to this sweater: below is the inspiration for The Deauville sweater, including the instructions provided by Fleischer Yarns (this advertisement was listed on eBay). It is dated June 1920.

Making and Remaking

So I think I started on The Deauville in 2016. That means it’s been on my knitting needles for about three years… which is not to say that I’ve been working on it that whole time. Oh, no! This was definitely an on-and-off (mostly off) project–partly due to the fact that I just don’t pick up my knitting needles that often, but also because I encountered problems with this sweater that were demoralizing and time consuming.

I tried to follow the instructions as best I could. I think I did pretty well with the back and front. Then I started on the sleeves. But it became apparent as the first sleeve took shape that the sleeve I was knitting was not going to make a sleeve shape that made sense for the shape of the sweater. The top of the sleeves would have had three separate curves and the bottom of the sleeve would have curved down like a bishop sleeve. What???

Here’s the point in knitting that sleeve when I stopped. The top of the sleeve is the top of the photo. You can see that’s started to go downhill, but that was only about ⅓ of the way across rather than about ½, as you would expect for a sleeve. And the bottom curves down… why? I have no idea. It doesn’t make sense given the illustration of the finished sweater.

I could not see how the directions would produce usable sleeves, so I took apart what I had knitted and created my own instructions that made an expected sleeve shape. The sleeves took a really long time to knit… because it turns out that I had made them much wider and longer than they needed to be! I had lovely bell shaped sleeves, but that wasn’t the shape in the inspiration… ugh! (No photos, because I was frustrated at this point and just wanted to keep moving.)

I discovered the sleeve shape after having sewn up the sleeve inseams, the shoulder and side seams of the body, and attaching one sleeve. I was not inspired to re-knit two sleeves again, so I had to think of other solutions. In addition, I’d discovered other problems during my first fitting… I realized that the back of the sweater was 5″ smaller across than the front. What??? This pulled the side seams to the back and also made the sweater waaaay too tight around my body. That’s not the right style at all! It also explained why it was hard to set the sleeves in nicely–there was way more sleeve than armsceye!

If you look carefully at my shoulders in this photo you can see that the armsceye seam sits pretty far back on my shoulders in the back, due to the narrow back panel. Luckily the sleeves have a shape that accommodates being pulled so far back.

It was my goal to wear this for an event in November and by now it was mid-October, so I had to come up with solutions that wouldn’t take too much time to execute (or add too much frustration). I’d put in so much time already–I was annoyed with the sweater but determined to carry on! I decided that I could take in the sleeves, hem them, add in two 2.5″ panels to the body, and hem the very long bottom of the sweater. That would solve most of the problems, but it required taking apart most of the seams I had just sewn. Ugh!

Oh, and one other problem from that first fitting? The v-neck was unreasonably deep! It went all the way down to the middle of my ribcage. And there was really nothing to do about that in terms of knitting something new. I decided to stitch it partway shut, hoping that the tassel in the front would hide my Frankenstein seam.

Happier Progress and Finishing

I unstitched my seams and knit my new panels, hoping that my side panel additions would look intentional or mostly not noticeable. (Luckily, from the outside they’re really not noticeable, are hidden under my arms, and symmetrical, so vaguely intentional looking. Yay!) After making the new panels, I sewed up all the seams again. I found that the sleeve to armsceye ratio was much better, so that was positive.

Here’s the inside of the sweater, showing one of the added-in side panels, as well as the hemmed bottom edge, and the white contrast band.

The next step was to take in the sleeves (more unstitching and restitching). Finally, I hemmed the sleeves and bottom edge, making for rather thick edges, especially at the sleeve hems, where the seam was taken in and then the sleeve was hemmed! Luckily it’s not too visible, just a little bulky when you can feel it–which I didn’t really notice while wearing the sweater, so that’s good.

Here’s the inside of one sleeve, showing the taken-in-seam (which was whipped down to keep the bulk in place), the hem of the sleeves (also whipped down), and the white contrast band.

At some point along the way I’d made the long rectangle for the belt, so that was done. It was an easy no-stress step to add in during the midst of all the frustrating sleeve/side/seam ripping business.

The final steps were to make and add the white bands of trim as well as the collar and tassels. At this point I threw the instructions out the window, using them for general guidelines but making it up as I went along. I decided that my rounded hemmed bottom edges wouldn’t look proportional with a single layer of white knit band, so I decided on the final widths I wanted, knit them double wide, sewed them into a tube, and then sewed the tube to the sleeves and bottom edge. I like the result!

I mostly followed the collar directions (I changed the length to match my neck opening and changed the curve slightly), but wanted a rounded, doubled collar look to match the bands. To do that, I made the collar a bit wider than I intended for it to be, turned under the outside edge, and whip stitched it down. The instructions gave no information on how to attach the collar, so I whip stitched that, too. (In addition to the collar, this photo also shows the inside of the v-neck that was stitched together. I finished those stitches off with a bow, to offset the frustration of the sweater.)

Done!

And that was it! It was a bit of a rush at the end, but I got it done in time to wear to the event–a Thanksgiving parade in which friends and I represented support for women’s suffrage. The 19th amendment granting women’s suffrage was ratified in 1920, but did you that it was approved by the House of Representatives and the Senate in 2019? Any year is a year worth celebrating suffrage, in my opinion, whether it’s a 100th anniversary year or not!

About Fleisher Yarns

I did a bit of research on Fleisher yarns, and Silverglow in particular (as that is the specific line of yarn that my inspiration advertisement is promoting). This blog has compiled an amazing resource, listing Fleisher Yarns from the 1890s through the 1970s, with photos. Here is the listing from that resource for Silverglow:

Silverglow

1904: ​​ “A soft and lofty two-fold yarn, a mixture of wool and art silk, having a rich, lustrous appearance. ​​ Adapted for light weight sweater’s, scarfs, sportswear, etc.”

Back to my thoughts about the weight of my yarn, this description pushes me towards the thought that my yarn was a bit heavy for the original intentions. Although, I was thinking of this sweater as being on the sporty side of things (hence my accessories of the pom pom hat and wide scarf with tassels–inspired by ads such as those below), so I think it is still tangentially possible for this yarn weight to make sense–and it certainly did a great job of keeping me warm!

Interestingly, you can still find Fleischer Yarn. Here is one example, and though it’s not clear exactly when these skeins are from, I bet that a bit of looking at the labels on the first resource I linked might answer that question.

About The Color Of My Sweater

The color of my sweater color is one that I love. Berries of all kinds are yummy and pretty! But is it a reasonable choice for 1920? Well, I did a bit of researching that, too. Here is a color chart for Fleisher Yarns from 1929. My boysenberry color isn’t represented, but there are yarns with a similar depth of color and saturation, so I don’t think it’s out of the realm of possibility for a color like this to have existed at that time. For example, combine Wild Aster and Cardinal on the color chart and you might get a color similar to my yarn.

A Few More Photos

To finish off, here are a few more photos of my Deauville sweater, which was most definitely an exercise in determination!

1925 Blue Coral At A Castle, Sort Of

I had the good fortune of attending a 1920s lawn party back in July at Winnikenni Castle. This was a new location to me and it sounded quite romantic and fabulous. However, I found that the idea conjured in my head lived up to the choice of materials and architectural style but didn’t quite live up to the scale I was envisioning.

I wore my 1925 Blue Coral Day Dress made last summer. This trusty dress is lightweight and breathable–essential for hot summer days!

The lawn party was on the smaller side, as these things go these days (so many lawn parties have grown to be huge–that’s great, but also a bit overwhelming sometimes). I found this size to be lovely and intimate. It was hot, but there was shade to help stay reasonably cool.

And there was dancing. The idea was lovely in theory, but it was a little hot for too much movement. My dancing was mostly perfunctory and not caught in any good photos. I had no problem taking photos of friends dancing, though!

I chose to add the pink sash for this wearing of the dress (see the construction post for this dress for all my sash options). It’s nice to be able to change up the look of the dress with simple accessories. And as always, I appreciated the circular shape of the skirt which allows for swoosh and movement. (It’s not your average sack of a 1920s dress on the bottom half!)

All in all, a nice day out enjoying the summer weather.

Dreaming Of Summer, 1920s Style

Spring has finally come! We’ve had a lot of rain (but it brings May flowers, right?), but also some glorious warm weekend days. Trees are starting to show small leaves, buds, and even full pink and white flowers. The daffodils are blooming and the allium and tulips in my garden are starting to push their leaves and stems towards the sun.

I love winter–the wool skirts, furry boots, outdoor ice skating, and skiing–but I am tired of being cold and ready for a change in my wardrobe! As the weather warms it’s reminding me of historical picnics, beautiful green trees rolling away in the distance, and the warmth of summer that is inevitably on the way.

These photos are from last year’s Gatsby On The Isles adventure. They didn’t make it into my outfit posts (1933 Sunshine Yellow Striped Dress or 1933 Summer Hat) so I’ve been saving them for a day when I’m remembering the warm rays of August sun.

Picnic blankets, baskets, and parasols! After arriving on the island it’s lovely to settle down to an elegant picnic repast.

It’s the 1920s for the weekend…a great opportunity to break out the spectators! I greatly enjoyed wearing my Royal Vintage shoes. Read more about my thoughts on them in the post about my 1933 dress.

The warm sun eventually made a bit of wading sound like just the thing. The rocks and rock wall were great for photos.

After dark it was time for a bit of dancing and socializing in more civilized clothes. It’s fun to explore the hotel and its various parlors.

Sunday is generally a bit more restful. One year I napped on a rocking chair on the huge wraparound porch while listening to the sound of the waves. Last year we played card games.

Give me another five months and I’ll be tired of warm weather, but for now its the things daydreams are made of! Are you dreaming of spring and summer yet?

1926 Silver Robe de Style Second Styling

Today I have a new dress adventure to share with you: the second wearing of my 1926 Silver Lace Robe de Style to a Gatsby Ball in January. The last time I wore this dress was last August, so it was fun to bring it out again. I thought it fit in nicely with the idea of blue and silver for the new year, even though it wasn’t technically a new year themed event.

The robe de style dress was popularized during the 1920s particularly by the designer Lanvin. This alternative to the popular straight silhouette dresses of the 1920s is characterized by a dropped waist with wide skirts. Many of these dresses have panniers in them that are borrowed from the style of 18th century court dresses. Here is a little more information about the robe de style from the FIDM museum if you’d like to read more.

I have another more dramatic robe de style already, so this lace one is more of a nod to the robe de style, with softly gathered sections at the hips and no panniers or other understructure.

(My 1924 Golden Robe de Style is the more dramatic one. I made that dress in 2015 and posted about the construction of it this past post. Since then I have updated the trim on it to be much better suited to the dress. You can see the new trimming in these two past posts: in 2016 and in 2017.)

Last August I wore this dress with silver accessories: silver American Duchess Seaburys and silver hairpins. This time I decided to try my black Seaburys with silver rhinestone shoe clips, an ostrich feather/rhinestone hairpin (this is the same decoration I had in my hair for my 2016 Versailles look–how fitting to wear it again with a dress that has a nod to the shape of the gown I wore that night!), and my newly made black velvet handbag. It’s a bit hard to see the handbag in these photos, but if you look for it you can spot it in one hand or the other in most photos. Trying to show it off and not look ridiculous was a bit of a challenge.

(As a another side note, that same hairpin works really well for the 1890s, too! Who knew it could so easily shift between not only decades, but centuries!)

While packing and getting dressed, I couldn’t decide which dress to wear to the ball: this silver robe de style or my 1927 Blush Sparkle Dress. I brought both of them with me to the event and only made a decision when I realized that a friend hadn’t brought a sparkly dress to wear. (Never fear, she had a dress, just not a sparkly one!) The fabulous architecture of the The Fairmont Copley Plaza Hotel really called for some sparkle, so I wore the robe de style and loaned her the blush sparkle dress. It was fun to see it sparkling around the ballroom!

Showing off two different styles of 1920s dresses. Blush Sparkle on the left and Silver Robe de Style on the right. It’s hard to lounge and not look silly. This was one of the best we got!

After the second wearing, I am still pleased with this dress. It’s fun to dance in and a bit unusual in style: qualities that suit me perfectly.

I think I like this dramatic black and ostrich styling best so far. Do you have a preference between the first styling with silver accessories and this second wearing?

 

1926 Silver Lace Robe de Style

One of my summer sewing projects was a new 1920s robe de style. (And yes, I am clearly delayed in posting about it!) I already have one (my 1924 Golden Robe de Style) but I stumbled across a lovely lace at Joann Fabrics in the spring that called to join my wardrobe as a second dress in this category. I attend enough 1920s evening events that I can never seem to have enough dresses. Doesn’t that sound grand written out? I actually do have plenty of dresses, but it’s nice to have variety and cycle through different styles, types of fabrics, weights, etc.

I’ve enjoyed wearing my first robe de style and wanted to try another one with different characteristics. The 1924 golden one is made of silk taffeta and has an ankle length skirt, but I wanted this one to be much lighter weight and shorter in length. I also wanted a different neckline. After looking through my Robe de Style Pinterest board for inspiration I settled on this dress, a Boué Soeurs robe de style from fall/winter 1925-6. This is where my date of 1926 for my new robe de style comes from.

Obviously the lace is not opaque so as with the original dress I needed a lining. I settled on the icy blue because it was from my stash. (You’ve seen this fabric before, in my 1899 evening gown.) It was great to use a stash fabric for cost saving and stash-diminishing purposes as well as the fact that the colors coordinate. And, I was able to accessorize with a large flower pin in a very similar color that has been in my stash since before I had a fabric stash! Isn’t it wonderful to find good homes for odds and ends like this?

In addition to the flower pin, I also wore my extra long strand of faux pearls, my American Duchess silver Seabury shoes, and vintage silver hair pins. Oh, and earrings. But I can’t remember which ones and I can’t tell from the photos which pair they are. I’ll have to figure that out again next time I wear this dress!

The pattern for this dress is me-made, composed of mostly rectangular shapes based on my measurements. The body of the lining is basically an upside down T shape, where the sides are gathered into a slit that extends into the main body on each side by a few inches. (You can see what I’m talking about in the photo below.) The lining has a straight top edge with rectanglur straps attached. The hem angles down slightly on the sides intentionally. I still wanted an uneven hem as with my 1924 dress, but I wanted a less dramatic difference than with that dress.

The lace layer was a little more complicated. I wanted an uneven hem to match the lining, but I also wanted to keep the hem following the scallops across the fabric. So… I had to keep my hem straight. That means I had to make the tops of the sides curve up since the bottom couldn’t curve down, but that meant I couldn’t cut my lace layers as a T, because the curve up would cut into the sides of the dress.

My solution was to add a seam across the lace pieces at the height of the gathers. To do this I perfectly matched the scallops, carefully layered and stitched them with a narrow zig zag, and then trimmed away the excess fabric to make the seam almost entirely invisible. Can you spot it in this photo?

I also had to trim away the ‘eyelash’ bits left over after cutting along the scalloped pattern along the hem. This photo shows that step in progress. A bit tedious, but worth it!

Unlike the lining with its straight top edge, the lace has a v neck on one side and a scoop on the other. This layer is interchangeable in terms of which is front and back, since they’re the same with no special shaping. The edges of the lining are finished by machine while the neckline and the armholes of the lace are narrow hemmed by hand.

This new dress can be worn with or without panniers, but for the first wearing I went without in order to make the full skirt more subtle and to differentiate the dress from my 1924 Golden Robe de Style (which needs to be worn with panniers).

While this dress could be worn at any time of year, I am particularly enchanted with the idea of it being perfectly suited to a 1920s New Year party. The colors and silver lace seem well suited to that theme.

And on that note, in case I don’t get another post in before 2019… happy new year!

1920s Beaded Bag (HSM #11)

The November Historical Sew Monthly Challenge was Purses and Bags (you’ve got your arms covered in July, your hands in September, now make something amazing to dangle from them). Late in the month I realized this was a great poke to finish an idea I’ve had for about six years. It was a bit of a challenge to complete my project before the end of the month, but I just slipped in, finishing it on November 30.

The idea came from my 1912 Tea Gown. I had intended it to have elaborate beading, but decided not to do that for a variety of reasons detailed in that past post. However, I had already beaded one panel that I decided not to use. I’ve been holding on to it waiting for the opportunity to put it to use in some other way. And so, I decided to turn it into a handbag.

Saving your scraps comes in handy on projects like this, because I had plenty of velvet to cut the additional pieces I needed for the bag. I looked through my stash to find a lining and came up with grey silk shantung as the best option. This was also a piece of fabric that I only had scraps of. It was originally used for the boning channels on an 1883 corset I made way back in 2011 (you can see it in this rather old post).

My inspiration is this page showing handbags from 1922 (source). It inspired me to go in a more structural direction rather than a gathered top bag, which was my initial thought.

I had the idea in mind, but I was restricted in the shape of the bag based on the beading that already existed on the main piece. So I cut out another rectangle the same shape as the beaded piece, a long strip for the outside edges of the bag, a strap piece, and a triangle piece to make a flap that would close the top.

Along the way I realized that interfacing wasn’t going to stiffen the bag enough for what I was envisioning. I cast about for ideas of what to use for stiffening and settled on cutting up a shoe box that was in my recycle bin. It was a great weight of cardboard–not too thick, not too thin, and not too bendy. There are cardboard pieces on each flat side, along the bottom, and a strip along the top edge to keep the flap nicely shaped. The pieces on the sides and bottom are (shhh…) masking taped together to create a flexible but stiff foundation for the bag. The piece in the top is stitched into a channel that is only sewn through the interlining so it doesn’t show on the velvet or the lining.

I assembled my pieces, thinking hard about which part to leave open to set in the lining, and struggling a bit with the shifty velvet. I wanted to sew most of the seams on the machine for speed, but sewing it by hand would probably have been more pleasant. I wrangled it mostly into submission, only needing to restitch a few sections as I went along. The only hand sewing came when I needed to close up the lining after putting all the pieces together. Things had become a bit wonky with seam allowances and shifting velvet, so I did my best, figuring that the seam would be on the inside and I really just wanted to finish the darn thing.

After that seam, the only thing left was a closure. I decided on a simple hook and bar. Not quite as classy as a real purse, but it gets the job done and I had it on hand. On the outside is a decorative button.

And that’s it, except the facts!

Fabric: Scraps of silk velvet, silk shantung, and cotton canvas.

Pattern: My own.

Year: c. 1925.

Notions: A shoe box, thread, beads, and a button.

How historically accurate is it?: 60%? The silhouette and fabrics are plausible, though the cardboard probably isn’t. The beads are certainly too big and the method of closure is unlikely unless the item was made at home.

Hours to complete: Not counting the beading, approximately 3 hours.

First worn: Not yet!

Total cost: Free! All of the materials and notions came from my stash.

Exploring The Crane Estate Gardens

I recently shared photos of my 1925 Blue Coral Day Dress and Lace Cloche, both of which I wore to the Crane Estate Gatsby themed lawn party in August. I wanted to share a few more photos from the day that didn’t fit into posts about the construction of the clothes I made for the event. To start, here’s our elegant, shade-proving picnic setup. This lawn party is always hot, so parasols and umbrellas are essential to stay comfortable.

After sitting for awhile we decided to explore the gardens. Every year I’ve been they’ve been a lovely and cool respite during the hot afternoon.

This year we were excited to find that an area that has previously been closed off behind a locked gate was open! (Check out this post to see the closed gate!) There were lovely flowers in this area and fun spots to take photos, too!

I enjoyed looking at the interesting, new sights as well as the columns. It felt like a grand adventure and was easy to imagine we were in the (mostly well-manicured) ruins of some ancient civilization.

Our walk also included a stroll around the main house, where there were antique car rides. We didn’t take a ride, but it was fun to capture one of the cars in our photos.

All in all, I had a nice day and enjoyed adding new memories to those I already have from this event.

1925 Lace Cloche

I knew I wanted a cloche to go with my 1925 Blue Coral Dress from early on in the process of making it. It was going to be hot when I wore the dress, so I knew I wanted something that would both look and feel lightweight. Turns out any hat was warmer than a bare head (well, one with hair on it!), but that being said, I think this was on the right track with a lightweight hat.

I considered making the cloche from fabric, but couldn’t decide on a style with seams that I liked. However, as I was browsing my Pinterest board, my eyes kept settling on straw, horsehair, and lace hats. It seemed like that was the way to go.

I didn’t have any particular materials on hand or in mind for that type of hat but I had come across a modern cotton lace cloche on Amazon for $14 that seemed like a good starting point. It’s no longer available, but I’m sure a careful search could find something similar. To the right is what it looked like before I started changing it up.

Generally, modern cloches have such a deep crown that they don’t leave any space for hair arranged on the back of the head. I have long hair, so that just doesn’t work for me. Cloches from the 1920s frequently have a cutout in the back to allow for your neck… or hair! They also have more interesting brims than modern cloches often do. Perfect. That’s what I wanted. An interesting brim and a cutout for my hair.

With my design plan in place, I started disassembling the modern cloche. First, I removed the braided band and flower. Then, I started unwrapping the lace on the brim, taking out the stitching that held one circumference to the next. I stopped at the bottom of the crown. I removed the inner hat band for most of the way around the hat, so I could stitch the new brim shape and the back cutout without stitching through the hat band.

Next, I played with the lace I had unwrapped for the brim to decide on a new shape. Once I made some decisions I had to make a few shorter pieces out of the lace, but most of it I tried to keep intact. In the back, I decided where I wanted my cut out to be… and cut it! Then I bound the edge using the lace and topstitched it down to encase the edges.

It was a bit tricky to find an acceptable shape for the new brim. The first few tries were so similar in shape to the crown of the hat that they hardly showed when I put it on my head. I ended up with a brim that flares out a bit so it stands away from the crown of the hat, especially in the front. I had to be careful to cover the ends of the plastic horsehair braid that backs the cotton lace, as it is very poky when cut. I covered the ends either by turning them under or having the inner hat band cover them.

After sorting out the brim and back cutout it was time to reattach the inner hat band. Then I sewed on my trim. Here’s what the hat looked like on the inside after all that.

I’ve loved Leimomi’s cloche decoration in this post since she posted about it in 2014. Having that in mind, I thought of what bits of trim I already had in my stash and what might work for this hat. I decided on a random yard of navy grosgrain ribbon, which I cut into thirds, pleated, and attached in imitation of this hat.

When I styled my hair, I tried to have hair come down to my jawline more than I usually do. I think cloches look less silly if there is some hair showing around them. My hair didn’t really look like a bob, but at least there was some hair showing in the front. In the back, it was pinned into a low twist-y mass of curls.

The great thing about the materials of this hat is that they are intended to be flexible for packing and traveling. Not only is it easy to store this hat but it’s also easy to remove it at a picnic and leave it on the blanket or put it in a bag without worrying that it will be damaged. It can get crushed and bounce back into shape!

In the end, I continue to think my head looks like an egg when I wear a cloche. I like styles that don’t hug my head better! That’s my own feeling–other people don’t think it’s nearly as egg-like as I do! But as egg-heads go, this was better than some attempts, so I think we’ll call it a success! It certainly looks cute on the fence!

1925 Blue Coral Day Dress (HSM #8)

The summer has been very busy and I don’t feel like I’ve completed very many sewing projects for myself. Really the only reason I’ve completed anything is because I’ve been live streaming my sewing, which forces me to make things from the list of the-things-I-want-to-make-that-I-never-make-time-for. Do you have a list like that? Mine is lengthy!

One of the first of these things-I-don’t-usually-make-time-for projects was a dress made out of one of the fabrics I bought earlier this year. I really wanted to have it for events this month as they are generally quite hot and the fabric I found is nice and lightweight while still being opaque. I found this fabric at a local discount store for the awesome price of $2.99/yard and then later saw it at a regular price store for somewhere closer to $10/yard, which really made me feel like I got a deal!

The pattern for this dress is a Quinnpen special (ie. made by me). I took my inspiration directly from this extant dress at All The Pretty Dresses. Due to that, it qualifies for the HSM Challenge #8 Extant Originals (copy an extant historical garment as closely as possible)!

To start, just the facts:

Fabric: 2.5 yards cotton lawn.

Pattern: My own.

Year: 1925.

Notions: Small bits of contrasting fabric for bias binding, thread.

How historically accurate is it?: I’d say this one is about as close as I can get to 100%!

Hours to complete: Approximately 8 hours.

First worn: August 5, 2018.

Total cost: $10.50 (including the fabrics I used for decorative sash options).

For the bodice of this new dress, I started with my 1927 Blush Sparkle dress (that dress started life as a tube before I added a head hole, armholes, and side seams/darts to about the hip level). For the skirt, I made a circular pattern that had the zig zag top edges that are featured in the extant dress. It was a bit of trial and error process to get the zig zags just right, but I made it in the end! You can see the topstitched zig zag detail on the extant inspiration if you look at the pictures carefully.

The zig zag top edge of the skirt is pressed under and topstitched onto the bodice. On both my dress and the extant dress that detail gets lost in the pattern, but it allows the skirt to have a lovely drape and fullness while the top can stay that straight 1920s shape that is so iconic. Here’s a closeup of my topstitching. Not bad on the pattern matching!

I finished my dress armholes and neck hole using bias, as I believe the original did based on looking at the photos. My only changes here were to use a contrasting color so I could actually see where the openings are (before I put on the orange binding the blue on blue pattern just made a big indistinguishable pile!) and to turn the bias binding to the inside of the openings (given that I was using a contrasting color). Aside from that the only other detail I omitted was a center back seam on the bodice since I had enough fabric not to need it when I was cutting out the pieces.

The photo above shows the dress with two different sash options that I made for it: pink and orange. I bought the orange when I bought the blue, but when I got home I thought it might be too bold and decided I might like the pink better. But I really couldn’t decide, so in the end, I made both!

When I wore the dress, I was still undecided… so I took pictures with all three options: no sash, pink sash, and orange sash. See each look below!

The idea behind a sash was this inspiration: Wilton Williams, The Bystander, August 12th 1925, though after wearing it my preference is no sash! I think that the bold, large scale patterns in the fabrics of the inspiration dresses lend themselves better to a sash than this blue dress.  The bonus part of not having a sash is that the dress is easy to wear, there’s no fussing with keeping a sash in place, and the dress really does have a nice 1920s shape to it even though the detail of the zig zag is lost from more than a foot or two away. What do you think? Does one style of sash (or no sash) speak most to you?

It’s fun to have a new dress to wear, discuss, and document! There are more dresses in the live stream queue, so if you want to stay in touch with what I’m making I would love to have you join me for one of my virtual sewing circles. You can join me on Wednesdays and Fridays from 9-10:30pm EST!

Spring & Summer Fabric Stash Additions: Stripes & Patterns

For most of this year, I’ve had a dress in mind that I want to build for an event in August. I’ve been on the hunt for just the right striped fabric for it for a few months, but really hadn’t found anything that was just right. I was shopping for another fabric and saw that Farmhouse Fabrics had a large section of stripes… I had to come back and look through them!

‘Danger!’ Should have been posted somewhere, because I wound up purchasing three different striped cotton fabrics instead of just the one I’d been looking for!

I have solid plans for all three fabrics, which somewhat justifies their purchase. The green seersucker I plan to make a modern dress out of, most likely with a circle skirt. The cotton candy stripe, as I call it, I’m planning to also use for a modern dress based on New Look #6143. The yellow stripe is intended for McCall’s #7153, a 1933 Archive Collection pattern.

I also came across (yes, I promise, I wasn’t intentionally looking for these either!) two interesting patterned fabrics this spring.

The one on the left is a rayon from Joann’s (and in looking for the link I see they’ve got a whole bunch of lovely looking new rayon prints–more danger!). It’s great that they’ve got a wider variety of fiber contents lately. I think it will make an interesting Henrietta Maria. Leimomi posted one awhile ago that I loved and this fabric reminds me of it a little.

The fabric on the right was super discounted at a local store (though I’ve seen at regular price at another store, so I definitely got a deal). It’s a lovely cotton lawn that I think will make an interesting 1920s day dress. I’ve got lots of evening gowns but my daywear options are somewhat limited. It will be fun to have new 1920s daywear! In fact, I’ve already started making a dress with the cotton lawn! I’ve been posting progress pictures of it on my Instagram account. Check it out!

Oh, I also came across remnants of seafoam green silk taffeta for a bargain price that I also bought, though I don’t have a picture or a specific project in mind for that. It’s hard to pass up silk taffeta even when there is no project in mind, because if you go on a hunt for a specific color you can’t usually find it at a bargain price.

I’m looking forward to putting these new fabric projects high enough on the to-do list to actually accomplish them!

SaveSave

SaveSave

SaveSave

SaveSave